Sapphire

Produkte anzeigen

Almath Crucibles offer a variety of sapphire tubes.

Sapphire tubes are ideal for protecting high-temperature thermocouples in corrosive environments, are 100% gas tight and will operate up to 2000C.

These tubes are not always held in stock – please check current delivery times with us if this is critical
Different diameters and lengths are available on request. Please ask
We can also offer custom-made sapphire products. Please request a quotation

Typical Applications

High-temperature protection tubes
Kiln furniture
Electrical insulators/substrates
Engineering ceramics in turbine engine parts
Infrared-transmitting windows

Materialeigenschaften

Bitte beachten Sie, dass die hierin enthaltenen Informationen nur zu Vergleichszwecken angeboten werden und nicht als absolute technische Daten oder als Garantie oder Zusicherung, für die wir die rechtliche Verantwortung übernehmen, ausgelegt werden dürfen.

Chemical Resistance	-
Acids – Concentrated	Good
Acids – dilute	Good
Thermische Diffusionsfähigkeit, 25°C	Good
Kontinuierliche Betriebstemperatur	Good
Maximale Leerlauftemperatur	Good

Electrical Properties	-
Dielectric constant	7.5-11.5
Dielectric strength (kV mm-1)	15-50
Volume resistivity @25 ̊C (Ohm-cm)	>10(14)

Mechanical Properties	-
Compressive strength (MPa)	2100
Hardness – Knoop (kgf mm-2)	2000
Hardness – Vickers (kgf mm-2)	1600-1800
Tensile modulus (GPa)	350-390

Physical Properties	-
Apparent porosity (%)	1
Density (g cm-3)	3.985
Refractive index	1.71-1.79
Useful optical transmission range (nm)	150-5500
Water absorption – saturation (%)	1

Thermal Properties	-
Coefficient of thermal expansion @20-1000 ̊C (x10-6 K-1 )	5.8
Melting point ( ̊C)	2050
Specific heat @25 ̊C ( J K-1 kg-1 )	750
Thermal conductivity @20 ̊C (W m-1 K-1 )	35-40
Upper continuous use temperature ( ̊C)	1800-1950

MESSDATEN - Alle Messdaten sind typisch und wurden bei Raumtemperatur gemessen, sofern nicht anders angegeben.
THERMAL SHOCK RESISTANCE – Tests are run by quenching samples into water from various elevated temperatures. The change in temperature where a sharp decrease in flexural strength is observed is listed as ‘delta Tc’
CHEMICAL RESISTANCE – Although all alumina and zirconia ceramics are highly resistant to chemical attack, it is recommended that specific applications are discussed with Almath Crucibles to ensure optimum ceramic selection

View our full range of Sapphire products.

Produkte anzeigen

Contact us to discuss a custom Sapphire solution.

Rufen Sie an.

E-Mail

Firmenregistrierungsnummer: 3167902

Sapphire

Sapphire

Typical Applications

Materialeigenschaften

View our full range of Sapphire products.

Contact us to discuss a custom Sapphire solution.

Schnelle Links

Policen & Zertifizierungen

Kontakt

Die Öffnungszeiten